Albrecht DB 275, Manual

Page: 63 / 184

1.10 PRI Priority
The steps for setting of PRI:

Press [MENU] -
“εenu”Ν
appears, next line remains blank.

Press[9] -
“θRI”
appears and status is shown (On or Off). Each operation will change
status.
Turning on PRI, (supposed Priority Channel 1 is under Channel Mode), then scanning will happen
in the sequence 1-2-1-3-1-4 and so on.
1.11 SCAN
This function allows scanning over the frequencies (VFO) or the stored channels in sequence.

Press [MENU] -
“εenu”Ν
appears, followed by a blank line.

Press [#/MR] -
“Sσρζ”Ν
appears. Next line will show
“ηζ”
and scanner starts.

During scanning, you can choose [UP]/ [DOWN] to change scan direction, and then press
other buttons to exit.
When in FM Broadcast radio mode, Scanning function can be used to scan the frequency.
Scanning will be stopped if a radio station with a signal is received. If you want to stop the scanning
procedure manually, just press any other button.