ALAT UJI OM-2041 Instruction Manual Download

Page: 10 / 55

Mounting and replacement of the batteries

This unit is designed to be operated with four AA batteries.

[Mounting the batteries]

Switch off this unit.

Turn the battery cover lock counterclockwise to put it in the open situation by a coin.

Remove the battery cover to open the battery insertion port.

The marking to show the battery orientation is provided at the lower portion on the bottom surface

of this unit. Insert four AA batteries properly according to this indication.

Hang the hinge of the battery cover on the hinge support of this unit to mount the battery cover.

Turn the battery cover lock clockwise to lock it by a coin.

If the external power supply (AC adaptor) is not connected, the unit starts immediately after replacing
the batteries.

CAUTION

•

Do not use any battery other than the specified one. Otherwise, the unit may malfunction.

•

If the battery cover is not closed completely, the water may enter or the cover may be opened when

a small shock is applied to the unit. Close the battery cover firmly to avoid such troubles.
Otherwise, the unit may malfunction.

•

Replace all of four batteries by new ones.

Battery cover

Cover lock

Battery port

Hinge

Battery orientation

AA batteries (4 pcs.)

OPEN

LOCK

OPE

LOCK

ロック状態

オープン状態

Lock

Open

Battery cover lock

Summary of Contents for OM-2041
























































Search results

Summary of Contents for OM-2041

Reviews:

Related manuals for OM-2041

Brands by name

Popular brands

ALAT UJI OM-2041, Instruction Manual

Search results

Summary of Contents for OM-2041

Reviews:

Related manuals for OM-2041

Brands by name

Popular brands