ALAT UJI OM-2041 Instruction Manual Download Page 53

Page: 53 / 55

The special cable is
disconnected.

Connect the special cable correctly.
For details, see

Connecting to your personal

computer.

The data read software is not
installed on the personal
computer.

Install the data read software.
For details, see the instruction manual for software.

The communication cannot
be operated.

The communication settings are
made incorrectly.

Check the input port.
See the instruction manual for software.

The display goes out.

The auto power off is activated.

Make the auto power off inactive.
For details, see

Various settings-3, Setting the

auto power off function.

The display is dark.

The LCD contrast is low.

Adjust the LCD contrast.
For details, see

Various settings-5, Adjusting the

LCD contrast.

The message, “Need to
change a backup battery !”,
is shown.

The backup battery runs out.

Contact your local sales representative or sales
office.

Check the above items and take corrective actions. If any malfunction still occurs, stop operation of
the unit, and then contact your local sales representative or sales office.

Summary of Contents for OM-2041
























































Search results

Summary of Contents for OM-2041

Reviews:

Related manuals for OM-2041

Brands by name

Popular brands

ALAT UJI OM-2041, Instruction Manual

Search results

Summary of Contents for OM-2041

Reviews:

Related manuals for OM-2041

Brands by name

Popular brands