Alaris Medical Systems MedSystem III, Directions For Use Manual, Page: 46 / 66

MAINTENANCE
MAINTENANCE
MAINTENANCE
43
Specifications
STANDARDS
CASE MATERIAL
DIMENSIONS
WEIGHT
AIR-IN-LINE (DEFAULT)
OCCLUSION
PRESSURE (DEFAULT)
OPERATING TEMPERATURE
TRANSPORT/STORAGE
TEMPERATURE
RATE RANGE
VOLUME RANGE
KVO RATE RANGE
RATE ACCURACY:
ADMINISTRATION SETS
POWER CONSUMPTION
BATTERIES
BATTERY CHARGE
AC ADAPTER & CORD LENGTH
AC POWER REQUIREMENTS
U
L 544, CSA C22.2, No. 125
Impact resistant polycarbonate/ABS alloy
Height 7.875 inches (20.00 centimeters)
Width 6 inches (15.24 centimeters)
Depth 2.10 inches (5.33 centimeters)
Approximately 5.1 pounds (2.3 kilograms) including pole clamp
500 µl (except for Neonatal device type which is 50µl)
15 psi except for Controller Pressure device type which is 3 ft H20
50-104° Fahrenheit (10° - 40° Celsius)
-4 to +131° Fahrenheit (-20 to + 55°C)
(<95°F or 35°C for optimum battery life)
0.1 - 999 milliliter per hour (each channel)
0.1 - 9999 milliliter (each channel)
0.1 - 20.0 milliliter per hour
1.0 - 999 ml/hr ±5% with a standard deviation of 1.96 under specified
conditions.*
0.1 - 0.9 ml/hr ±10% with a standard deviation of 1.96.
Use only MedSystem III® Administration Sets
6 watts AC power. Use only MedSystem III® AC Adapter, Model 1555,
or 1560A, ordered as 2861089.
Main – Rechargeable NiCd Battery Pack
Memory Back-up – Nonrechargeable Lithium
NOTE:
Use only approved Alaris Medical System® Battery Packs.
A fully charged battery has a minimum of 6 hours running time with all
channels running at 125 milliliters per hour and backlight usage of 2
minutes per hour.
The main battery retains 80% of its capacity after 500 charging cycles,
and retains 90% of its capacity after 3 months of continuous AC
charging.
NOTE: Replacement of both the main and memory backup
batteries must be performed by qualified service technicians.
Model 1555, 7.5 Vdc @ 1 Amp with 10 ft cord.
Model 1560A, 7.5 Vdc @ 1.65 Amp with 10.5 ft. cord.
Voltage 90 VAC to 132 VAC
Frequency 47 Hz to 63 Hz