AL-KO E.C.S12, Assembly And Operating Instructions Manual

Page: 44 / 240

20
Temperature range: Running:-10°C to + 45°C
In storage:-20°C to + 55°C
Transmission telegram: Transmitters with receiver are 32 bit-coded -telegram
Type of protection: IP 20
Weight: 80g
Control:
Supply voltage: +12V DC (+10VDC - +14VDC)
Current consumption 0.13A
Mechanical Dimensions: Without frame length x width x depth: 179mm x 134mm x 44mm
With frame length x width x depth: 201mm x 156mm x 44mm
Temperature range: Running:-10°C to + 45°C
In storage:-20°C to + 55°C
Type of protection: IP 20
Weight: 650g
Drive Unit:
motor
Rated voltage:
+12V DC (+10VDC - +20VDC) ED:50% over 15V ED:30%
Rated current: 5.5A
Maximum power: 12A
Type of protection: IP 44
Weight: 3.7kg
10.3 Changing the battery on the remote control
The battery compartment is on the rear of the remote control.
- Remove both of the empty batteries.
- Pay attention to the terminals when inserting the new batteries (2 x 1.5V micro LR 03 AAA)!
- Close the battery compartment.
Two spare batteries should be carried at all times.
10.4 Spare parts:
Spare parts are safety critical parts. For this reason when fitting spare parts in our products we rec-
ommend the use of original AL-KO parts or those parts that we have explicitly approved for fitting.
The reliability, safety and suitability our products have been determined using a special test proce-
dure. In spite of constantly monitoring the market we are unable to assess or vouch for other prod-
ucts.
Should a repair be necessary we have a network of AL-KO service stations giving coverage through-
out Europe. If required the list of service stations can be requested from us (Order no. 375912).
Please note that repair work must only be carried out by competent specialist workshops.
For clear identification of spare parts the service stations require the ETI = Spare Part Identification
no. on the control.