Main Landing Gear
3) Open the landing gear bag and sort the bolts, axles and other parts.
4) Place the landing gear onto the fuse with the THINNER ANGLED edge reward (the gear is shaped like an airfoil). Secure with 4
bolts an washers into the pre-installed blind nuts in the fuselage.
5) Place the wood filler block over the landing gear. Pay attention to the fit as it is directional. While the cuffs will hold this in
place, we suggest using a piece of clear tape, or white Ultracote for extra security.
6) Install the landing gear cuffs using the 4 phillips head bolts and washers provided. Note you can also use a silicon glue to se-
cure the cuffs.
