29) You can now re-mount your engine, mufflers and ignition box. The ignition box can be placed anywhere, but typically goes on
the top or side of the motor box. In our example, it’s been mounted to the firewall. Don’t forget to locktite everything!
30) There’s a pre-cut hole in the bottom of the firebox for the throttle servo, which should work perfectly for the majority of gas
engines. If your engines’ throttle is in a different spot, you can use the provided ply servo mount box to locate your throttle
servo where it works best. Install the servo using the manufacturers hardware, and then make a pushrod to connect the servo
to your engine. Use the provided ball link hardware in the gas engine parts bag.
