62
mode will flash.
9)
Select the hour of the finishing time using the selection
arrows and confirm by pressing on the AIRZONE icon
once.
10)
Select the minutes of the finishing time using the
selection arrows and confirm by pressing on the
AIRZONE
icon once (Fig. 30).
11.4. Modify a Programme
To modify a stored programme:
1)
Follow steps 1 to 4 of the previous section.
2)
Modify the required parameter:
•
Start time
: Press on the icon and press and hold
down the time area for 2 seconds until it flashes.
Modify using the arrows and confirm using the
AIRZONE icon.
•
Finishing time
: Press on the
icon and press and
hold down the time area for 2 seconds until it flashes.
Modify using the arrows and confirm using the
AIRZONE icon.
•
Set point temperature
for P1: Press on the set point
temperature for 2 seconds until it flashes. Modify
using the arrows and confirm using the AIRZONE
icon.
•
Operation Mode
for P2: Press on the operation
mode for 2 seconds until all the possible modes appear. Select the required mode and
confirm using the AIRZONE icon.
To exit or programme a different day/ group of days, press on the AIRZONE icon.
11.5. Disable a Programme
Disabling a programme means that a programme is set as if it was not set up, although it
remains stored in the memory of the system. If you wish to enable it again, simply follow the
steps to view it (steps 1 to 3) and press the On/Off icon again. In order to disable a stored
programme:
1)
Follow steps 1 to 4 of the previous section.
2)
Press the ON/OFF icon in order to disable or enable the programme again.
3)
Exit the set up menu by pressing on the AIRZONE icon.
Fig. 28 - Select the start time
Fig. 29 - Select the air-
conditioning mode or the set
point temperature
Fig. 30 - Select the finishing time
Summary of Contents for innobus
Page 1: ...Manual de Usuario Manuel d Utilisateur Manuale del Utente User s Guide V1 0 r001...
Page 2: ......
Page 67: ......
