Airzone innobus, User Manual

Page: 66 / 68

66
12.7. Time Scheduling with the BlueFace Master Thermostat
With BlueFace, programming the scheduling is easy and intuitive, as the user is guided step-
by-step. After accessing the programme scheduling screen, just follow the steps shown until
each programme has been completed.
Once the programme has been completed, it will be displayed in the list of programmes in
memory, and shown as activated (with a green icon next to the name). This indicates that the
programme is in memory and is active. A programme can be accessed individually and put
into StandBy mode so that it will not be executed.
List of programmes
Selecting the Type of
Programming
Setting the programme
name
Editing the programme
name
Selecting the
Temperature
Selecting the days
Selecting start and end
times
Programme Summary
The programmes scheduled are events of turning climate control on or selecting the climate
control mode from the defined options, at any one time. These values can, however, be
changed manually at any time. Bear in mind that, at all times when the programmes are
active, both the start event and the end event will be executed.
When there is at least one programme active, the “
Programmes Active
” icon will be displayed
in the main screen. If the screen is pressed, this icon will change to crossed out, indicating
that there are programmes in memory, but they will not be executed. This is how the time
programming/scheduling is disabled.