55
5.2. Selection of the Operation Mode
The Master Tacto thermostat has the same functions as the zone thermostats except that the
former incorporates a column to select the required mode:
Fig. 6 - Zone Thermostat
Fig. 7 - Master Thermostat
To select the operation mode of the Master thermostat follow these steps:
1)
From the User Mode, press on the active
air-conditioning mode icon once. The
picture below shows the Cooling Mode.
2)
All the mode icons will be shown and the
active mode will flash. The example below
shows the Cooling Mode is active.
Fig. 8 - Tacto Thermostat with the cooling mode
selected
Fig. 9 - Tacto thermostat with all the modes active
3)
Press once on the mode required. The
selected mode icon will flash. In the
example, the mode is Radiant Heating.
4)
Confirm the mode by pressing once on
the Airzone icon or wait for 3 seconds.
Fig. 10 - Tacto Thermostat with the Radiant
Heating Mode selected
Fig. 11 - Tacto Thermostat with the Combined
Heating Mode selected
NOTE:
To select
the Combined Heating Mode you have to make a
maintained click
on the
icon of Heating Mode (Fig. 9). To select the Radiant Heating Mode you have to make
a
double click
on the icon of Heating Mode.
Summary of Contents for innobus
Page 1: ...Manual de Usuario Manuel d Utilisateur Manuale del Utente User s Guide V1 0 r001...
Page 2: ......
Page 67: ......
