manualshive.com logo in svg

Airwell RWV01, Operation & Installation Manual

The Airwell RWV01 Operation & Installation Manual is available for free download on our website. This comprehensive manual provides detailed instructions for installing and operating your Airwell RWV01 product. Simply visit manualshive.com to access this invaluable resource and ensure optimal performance of your device.

Share
Download
background image

45

Operation

(1) Powered off in cooling mode, keep pressing “ON/OFF” key 
for 10 seconds, it will enter into the forced cooling function, 
and the cooling mode icon will be displayed on the interface. 

“LL” is flashing in the temp. area at the same time. Press “ON/
OFF” key to power off and exit forced cooling.

(2) Powered off in heating mode, keep pressing “ON/OFF” key 
for 10 seconds, it will enter into the forced heating function, 
and the heating mode icon will be displayed on the interface, 

“HH” is flashing in the temp. area at the same time. Press “ON/
OFF” key to power off and exit forced heating.
(3) All the keys are invalid except “ON/OFF” key under forced 

cooling/heating mode, which can be cancelled by powering off 

manually or receiving “trial operation” finished order from the 

communication. The former one can operate power off directly 
while the later one will make the controller do by following the 
order.

Forced Cooling/ Heating

Summary of Contents for RWV01





















































Reviews:

No comments

Related manuals for RWV01

Zetkama 221 User Manual preview
221
Brand: Zetkama Pages: 6
Facility Explorer FX Series Installation Instructions preview
FX Series
Brand: Facility Explorer Pages: 4
Eaton SC100 Operation Handbook preview
SC100
Brand: Eaton Pages: 86
Campbell CR10 PROM Replacement Procedure preview
CR10 PROM
Brand: Campbell Pages: 8
Campbell CS225 Instruction Manual preview
CS225
Brand: Campbell Pages: 22
Harmonic Drive LA Series Manual preview
LA Series
Brand: Harmonic Drive Pages: 25
Nelson MR Technical Application Manual preview
MR
Brand: Nelson Pages: 8
FATEK FBs-1HLC Operation Manuals preview
FBs-1HLC
Brand: FATEK Pages: 10
Uclear Motion Series User Manual preview
Motion Series
Brand: Uclear Pages: 40
IBM 3746-900 Installation Manual preview
3746-900
Brand: IBM Pages: 276
IBM 4769 Installation Manual preview
4769
Brand: IBM Pages: 32
IBM 3745 Series Connection And Integration Manual preview
3745 Series
Brand: IBM Pages: 157
Parkside PDWE 8 A1 Instructions Manual preview
PDWE 8 A1
Brand: Parkside Pages: 86
Balboa BP600 Tech Sheet preview
BP600
Brand: Balboa Pages: 23
Balboa VL260 Quick Reference Manual preview
VL260
Brand: Balboa Pages: 2
Wang 2236 Product/Maintenance Manual preview
2236
Brand: Wang Pages: 68
NAVITAS TSE Series Installation Manual preview
TSE Series
Brand: NAVITAS Pages: 14
Watts FEBCO 860 Small Series Installation Maintenance Repair Manual preview
FEBCO 860 Small Series
Brand: Watts Pages: 12

Brands by name

Popular brands

Load more brands