Airwell RWV01, Operation & Installation Manual

Page: 29 / 52

28
Operation
(1) Only in heating mode, this function is valid in function
circulation.
(2) For the four-way cassette model, press the SET key for
5s to enter the function circulation. When it switches to the
10°C heating function, 10°C will flash in the temp. display
area. Press the SET key to confirm, and 10°C will be statically
displayed.
(3) If the wired controller receives the signal of 10°C heating
function sent by the remote controller, 10°C will be statically
displayed in the temp. display area of the wired controller.
(4) If the wired controller is displaying room temp., when
the 10°C heating function is set. The 10°C will be statically
displayed for 3s ,then it changes to display room temp.. If the
temp. area displays room temp., press the Up/Down key first,
the 10°C heating icon will be displayed. Press the Up/Down key
again, exit the 10°C heating function. Meanwhile, the set temp.
will be displayed statically, at this moment, the SET character
flashes for 3s, then the room temp. and ROOM character
displays. Press the mode key to change the mode directly, and
at the same time exit the 10°C heating function; press the Fan
key or Time key, the command will be executed; press the Set
key and the Up/Down key to switch to the 10°C function, press
the function key again, the function will be canceled.
10°C Heating Function (Only valid for part of models)