16
Operation
Then hour position and “ON” are flashing; Press
key
again, the minute position and “ON” are flashing; Press
key again, it displays default
for the first time
(previous setting will be displayed if there is setting before).
Then the hour position and “OFF” are flashing; Press
key again, the minute position and “OFF” are flashing; Press
key again, it displays default
for the first time
(previous setting will be displayed if there is setting before).
Then the hour position and “ON” are flashing. Press
to
adjust the timer, minus/add 1 hour a time. Keep pressing to
accelerate the adjusting speed; Press
key again, the
minute position and “ON” are flashing; Press
key again,
it displays default
for the first time (previous setting
will be displayed if there is setting before). Then the hour and
“OFF” are flashing. Press
to adjust the timer, minus/add 1
hour a time. Keep pressing to accelerate the adjusting speed;
Press
key again, the minute position and “OFF” are
flashing. The controller will judge the order of timer on and off
and use the arrow to show the order. First ON then OFF: ON→
OFF; First OFF then ON: ON←OFF. Press
to confirm the
setting. If there is no input for 10s, this setting will be cancelled
and the timer will come back to the previous state.
Summary of Contents for RWV01
Page 2: ...1 Interface Display Parts and Functions ...
Page 50: ...49 C C A CON1 B 3 2 1 B red yellow white A Wired Controller Wiring Instruction ...
Page 51: ......
Page 52: ......