Airwell ONG3-17 R410A, Service Manual

Page: 114 / 127

11 . PANEL INSTALLING
Removing the grille:
1 . To open the grille, rotate the grille lock counterclockwise from horizontal position to vertical
position.(fig.22)
Rotate about 90
Grille lock
Fig.22
2. With the grille fully opened, remove the grille along the direction shown in Fig.23.
Fig.23
Temporary installation of the panel
Install two bolts (Accessory) onto the main unit (the corner of refrigerant tubing side and the
opposite corner).The detail is shown in Fig.24. Pay attention that leave 15-20mm bolt
unscrewed so as to hang the panel easily
1 9
Indoor unit cassette type
1.