Airwell ONG3-17 R410A, Service Manual

Page: 126 / 127

7
Wipe the unit with a soft dry cloth or clean it using a vacuum cleaner.
Do not use hot water or volatile materials which could damage the surface of the air conditioner.
Make sure there are no obstacles blocking the flow of inlet or outlet air, in both indoor and
outdoor units.
Make sure the power is properly connected.
Protect the inner unit from direct sun or lighting.
Indoor unit and remote control must be at least 1 meter away from a TV, radio or any other home
electronic appliance.
Air filter
Pull
To remove the air filters, open the front panel by rotating the
2 locks counterclockwise from horizontal to vertical position,
pull out the filters, and clean them by washing in warm soapy
water and dry thoroughly. Align and fit the filters in place.
Close the panel by rotating the lock to horizontal position.
If your air conditioner is provided with a filter
cleaning indicator,
a light blinks when
filter cleaning is needed. In
this case, remove the filters as indicated above,
clean them and press the RESET button to
turn OFF the indicator.
Only a qualified service technician is allowed to perform the maintenance. When
cleaning the filter, make sure the main power should be cut off. Or else fingers
touching the electrical parts or rotating fan by mistake can lead to body injury.