Airwell KXV Series, Engineering Manual

Page: 101 / 380

Engineering manual
101
2.6 Installation
2.6.1 Installation accessories
No. Accessories part Qty No. Accessories part Qty No. Accessories part Qty
1
Expansible hook
4 6
Out-let pipe sheath
1 11
Wall conduit
cover 1
2
Installation hook
4 7
Tightening band
20
3
Installation paper board
4 8
Drain elbow
1
12
Unit operation
manual
Installation
manual
2
4
Bolt M6 × 12
4 9
Seal ring
1
5
Out-let pipe clasp
1 10
Wall conduit
1
2.6.2 Select the best location
While selecting a place for the indoor unit:
1. Allow max. air flow to the desire space
2. Allow max return air flow
3. Ensure adequate drainage of condensed water
4. Ensure noise reduction near bedrooms
5. Leave a minimum 250 mm free space in front of the filter
6. Allow a free service access to electrical box
7. Allow easy access to the base of the indoor unit while providing enough space from the ceiling
8. Use serrated rubber under the unit and flexible joints to avoid resonance vibrations
Notice:
1. Do not install the cassette in a room where gasses, acids or inflammable products are stored, in order to avoid damage
to the aluminium and copper evaporators and the internal plastic parts.
2. Do not install the cassette in a workshop or a kitchen. Oil vapor attracted by the treated air could form deposits on the
cassette evaporators and modify their performance or damage the cassette's internal plastic parts.
3. Do not install the cassette in a laundry, or a room where steam is produced.
4. The appliance must be positioned so that the plug is accessible.
5. Installing the cassette will be easier with the use of a fork lift truck. Use the packing base by placing it between the
cassette and the truck forks.
6. It is recommended to install the cassette, as far as possible, in the centre of the room, in order to optimise treated air
distribution.