Airwell KXV Series, Engineering Manual

Page: 216 / 380

Engineering manual
216
1.4.5 Select location
WARNING
The installation of the air conditioning unit must be positioned in a location that can sufficiently support its weight
and give protection against adverse environmental conditions. Failure to do so may result in unit damage and possible
human injury.
CAUTION

Ensure that the unit is placed where there is no risk of flammable gases.

Ensure the outdoor unit is fixed to the base, to prevent movement of the unit.
Place selection
MVi system is suitable for installation in a commercial and light industrial environment.

Obtain permission from the customer to install the unit in a site that
satisfies
the following conditions:
1) A place that compliance with the requirement mentioned in the front page.
2) A place that permits horizontal installation of the unit.
3) A place that provides enough space for servicing safely.
4) A place that the drainage from the unit will not pose a problem.
5) A place that the unit does not bother next-door neighbors.
6) A place where the indoor unit and outdoor units’ piping and wiring lengths come within the allowable ranges.

Avoid installing in the following places (see the chart front)
1) Place exposed to air with high salt content (seaside area), or place exposed to large quantities of sulfide gas (hot
spring). Or special protective measures are needed.
2) Place where organic solvent is used nearby.
3) Place close to a machine generating high frequency.
4) Place with poor ventilation.
CAUTION

When an outdoor unit is installed in a place where is always exposed to strong wind like a coast or on the roof
of a high building, please apply the windproof measures referring to the following examples.

Install the unit so that its discharge port faces to the obstacle, keeping a distance 500mm or more between the
unit and the obstacle.

Ensure the air out-let direction is vertical to the wind direction of operation season of air conditioner.
Season wind