Safety
S-6
H990432
Be sure to stop the engine and let the coolant water sufficiently cool down
before draining it.
If the drain valve is opened before the coolant water is cool enough, hot
water could jet out, causing burns or scalding.
When washing the machine, cover the control panel, generator and its electric parts to prevent them
from being exposed to splashing water and avoid possible decrease in electrical insulation or other
troubles to the machine.
Dust, sand and dirt accumulated inside control panel could cause malfunction or difficulties with the
instruments. Clean them using compressed air.
A100285
Waste liquid from the machine contains harmful material. Do not discharge it
onto the ground or into the river, lake or sea. Such material will pollute the
environment.
Be sure to use a container to hold waste liquid from the machine.
Be sure to follow the designated regulations when disposing of oil, fuel,
coolant (antifreeze), filter, battery or other harmful materials.
The engine of this machine contains many electrical and electronic parts. Before welding, be sure to
disconnect all electronic control equipment.
Failure to do so could result in equipment malfunction due to excessive current.
Go
to
Discount-Equipment.com
to
order
your
parts
