AirLive RS-2500, User Manual, Page: 31 / 247

6. Configure
AirLive RS-2500 User’s Manual
26

Restoring Factory Default Settings
STEP 1
﹒ Select Reset System to Factory Setting in RS-2500 Configuration WebUI
STEP 2
﹒ Click OK at the bottom-right of the page to restore the factory settings. (Figure 6-4)
Figure 6-4 Reset Factory Settings

Email Settings
Select Enable E-mail Alert Notification under E-mail Settings. This function will enable
the RS-2500 to send e-mail alerts to the System Administrator when the network is being
attacked by hackers or when emergency conditions occur. (It can be set from Anomaly Flow
IP Setting to detect Hacker Attacks)

Enabling E-mail Alert Notification
STEP 1
﹒ Select Enable E-mail Alert Notification under E-Mail Settings.
STEP 2
﹒ Sender Address (Required by some ISPs): Enter the Sender Address.
STEP 3
﹒
SMTP Server IP: Enter SMTP server’s IP address
STEP 4
﹒ E-Mail Address 1: Enter the e-mail address of the first user to be notified.
STEP 5
﹒ E-Mail Address 2: Enter the e-mail address of the second user to be notified.
(Optional)
STEP 6
﹒ Click OK on the bottom-right of the screen to enable E-mail Alert Notification.
(Figure 6-5)