manualshive.com logo in svg

AirLive RS-2500, User Manual, Page: 28 / 247

Share
Download
AirLive RS-2500 User Manual Download Page 28

5. Administration 

 

 

 

23 

                       

AirLive RS-2500 User’s Manual

 

5.3 Software Update 

STEP 1

﹒

Select

 Software Update

 in 

System

, and follow the steps below: 

 

To obtain the version number from 

Version Number

 and obtain the latest 

version from Internet. And save the latest version in the hardware of the PC, 

which manage the RS-2500 

 

Click 

Browse

 and choose the latest software version file. 

 

Click

 OK

 and the system will update automatically. (Figure 5-5) 

 

Figure 5-5 Software Update 

 

 

It takes 4 minutes to update software. The system will reboot after 

update. During the updating time, please don’t turn off the PC or close

WebUI. It may cause some unexpected mistakes. (Strong suggests 

updating the software from LAN to avoid unexpected mistakes.) 

 

5.4 Logout 

STEP 1

﹒

Click 

Logout 

in 

System

 to protect the system while admin is away. (Figure 5-6) 

 

Figure 5-6 Confirm Logout WebUI 

STEP 2

﹒

Click 

OK 

and the logout message will appear in WebUI. (Figure 5-7)

 

 

Figure 5-7 Logout WebUI Message 

Summary of Contents for RS-2500
























































































































































































































































Reviews:

No comments