manualshive.com logo in svg

AirLive RS-2500, User Manual, Page: 34 / 247

Share
Download
AirLive RS-2500 User Manual Download Page 34

6. Configure 

 

 

 

29 

                       

AirLive RS-2500 User’s Manual

 

6.2 Date/Time 

 

Synchronize system clock 

The administrator can configure the RS-2500’s date and time by either syncing to an 

Internet Network Time Server (NTP) or by syncing to your computer’s clock.   

 

STEP 1

﹒

Select 

Enable synchronize with an Internet time Server 

(Figure 6-7)

 

STEP 2

﹒

Click the down arrow to select the

 offset time from GMT.

 

STEP 3

﹒

If necessary, select 

Enable daylight saving time setting

 

STEP 4

﹒

Enter the 

Server IP / Name

 with which you want to synchronize. 

STEP 5

﹒

Set the interval time to synchronize with outside servers. 

 

 

Figure 6-7 System Time Setting 

 

 

 

 

Click on the

 Sync

 button and then the RS-2500’s date and time will be 

synchronized to the Administrator’s PC. 

 

 

 

 

The value of 

Set Offset hours From GMT

 and

 Server IP / Name

 can 

be looking for from 

Assist

. 

 

 

 

 

 

 

 

Summary of Contents for RS-2500
























































































































































































































































Reviews:

No comments