manualshive.com logo in svg

AirLive RS-2500, User Manual, Page: 179 / 247

Share
Download
AirLive RS-2500 User Manual Download Page 179

20. Web VPN / SSL VPN 

 
 

 

AirLive RS-2500 User’s Manual 

174

20.2 Hardware Auth 

igure 20-3)

 

 

Accepted Hardware Authentication User:

 A list of the permitted client hardware 

tion to the RS-2500.

 

RS-2500.

 

 

Term of Hardware Auth 

(F

can establish an SSL VPN connec

 

Dropped Hardware Authentication User:

 A list of the client hardware is not 

permitted to establish an SSL VPN connection with the 

 

Figure 20-3 Web/SSL VPN Hardware Auth 

 

 

 

Hardware authentication provides a convenient alternative to 

username/password authentication. Clients only need to be added to 

the Accepted User list for the system to authenticate their computer 

based on their hardware (MAC address). 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for RS-2500
























































































































































































































































Reviews:

No comments