manualshive.com logo in svg

AirLive RS-2500, User Manual, Page: 17 / 247

Share
Download
AirLive RS-2500 User Manual Download Page 17

3. Configuring the RS-2500 

 

 

 

11 

                       

AirLive RS-2500 User’s Manual

 

 

 
 

3.4 Introduction to Web Management 

The RS-2500 offers both normal (http) and secured (https) Web Management interfaces.   

Their share the same interface and functions, and they can both be accessed through web 

browsers.    The only difference is HTTPS are encrypted for extra security.    Therefore, we 

will discuss them together as “Web Management” on this guide. 

 

If you are placing the RS-2500 behind router or firewall, you might need to open virtual 

server ports to RS-2500 on your firewall/router 

  HTTP:    TCP Port 80 

  HTTPS:   TCP/UDP Port 443 

 
 

3.4.1 

 

Getting into Web Management 

 

Normal Web Management (HTTP) 

To get into the Normal Web Management, simply type in the RS-2500’s IP address (default 

IP is 192.168.1.1) into the web browser’s address field.     
 

 

 

Summary of Contents for RS-2500
























































































































































































































































Reviews:

No comments