manualshive.com logo in svg

AirLive RS-2500, User Manual, Page: 158 / 247

Share
Download
AirLive RS-2500 User Manual Download Page 158

18. Policy 

 

 

 

153 

                       

AirLive RS-2500 User’s Manual

 

(6) 

DMZ to WAN: 

The source IP is in DMZ network; the destination is in WAN network. 

The system manager can set all the policy rules of DMZ to WAN packets in this 

function 

 

 

 

All the packets that go through RS-2500 must pass the policy 

permission. Therefore, the LAN, WAN, and DMZ network have to set 

the applicable policy when establish network connection. 

 

 

 

Define the required fields of Policy 

 

Source and Destination 

Source IP and Destination IP is according to the RS-2500’s point of view. The 

active side is the source; passive side is destination. 

 

Service 

It is the service item that controlled by Policy. The user can choose default value 

or the custom services that the system manager set in

 Service 

function. 

 

Action, WAN Port 

Control actions to permit or reject packets that delivered between LAN network 

and WAN network when pass through RS-2500 (See the chart and illustration 

below). 

 

Chart 

Name 

Illustration 

 

Permit all WAN 

network Interface 

Allow the packets that correspond with policy to 
be transferred by WAN1/2 Port 

 

Permit WAN1 

Allow the packets that correspond with policy to 
be transferred by WAN1 Port 

 

Permit WAN2 

Allow the packets that correspond with policy to 
be transferred by WAN2 Port 

 

DENY 

Reject the packets that correspond with policy 
to be transferred by WAN Port 

 

Permit VPN 

Allow the VPN packets that correspond with 
policy to be transferred 

 

 

 

 

 

Summary of Contents for RS-2500
























































































































































































































































Reviews:

No comments