5. Appendix
89
AirLive PoE-2600HD/
WN-2600HD User’s Manual
Video quality of the device
The focus on the
Camera is bad.
• The lens is dirty or dust is attached. Fingerprints, dust,
stain, etc. on the lens can degrade the image quality.
The color of the image
is poor or strange.
• Adjust White Balance.
• To insure the images you are viewing are the best they
can be, set the Display property setting (color quality) to
16bit at least and 24 bit or higher if possible within your
computer.
•The configuration on the device image display is
incorrect. You need to adjust the image related
parameters such as brightness, contrast, hue and
sharpness properly.
Image flickers.
• Wrong power line frequency makes images flicker.
Make sure the 50 or 60Hz format of your device.
• If the object is dark, the image will flicker. Make the
condition around the Camera brighter.
Noisy images occur.
The video images might be noisy if the device is located
in a very low light environment. Make the condition
around the camera brighter or turn the White-light LED
on.
Miscellaneous
Can not play the
recorded ASF file
Have installed Microsoft®’s DirectX 9.0 or later and use
the Windows Media Player 11.0 or later to play the AVI
filed recorded by the Device.
Appendix C: PING IP Address
The PING (stands for Packet Internet Groper) command is used to detect whether a
specific IP address is accessible by sending a packet to the specific address and waiting
for a reply. It’s also a very useful tool to confirm the device installed or if the IP address
conflicts with any other devices over the network.
If you want to make sure the IP address of the device, utilize the PING command as
follows:
z
Start a DOS window.
z
Type ping x.x.x.x, where x.x.x.x is the IP address of the device.
The replies, as illustrated below, will provide an explanation to the problem.
