AirLive PoE-2600HD User Manual Download Page 50

Page: 50 / 112

4. Administrating the Device

AirLive PoE-2600HD/
WN-2600HD User’s Manual

4.1.6 UPnP

UPnP is short for Universal Plug and Play, which is a networking architecture that provides

compatibility among networking equipment, software, and peripherals. This device is an

UPnP enabled Network Camera. If your operating system is UPnP enabled, the device will

automatically be detected and a new icon will be added to “My Network Places.” If you do

not want to use the UPnP functionality, it can be disabled.

In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT

traversal when your device is located on an intranet (LAN) and you wish to make it

available from the other (WAN) side of a NAT router. With NAT traversal properly

configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to

the device.

Summary of Contents for PoE-2600HD

















































































































Search results

Summary of Contents for PoE-2600HD

Reviews:

Related manuals for PoE-2600HD

Brands by name

Popular brands

AirLive PoE-2600HD, User Manual

Search results

Summary of Contents for PoE-2600HD

Reviews:

Related manuals for PoE-2600HD

Brands by name

Popular brands