background image

5. Appendix 

 
 
 

 

 

AirLive PoE-2600HD/ 
WN-2600HD User’s Manual 

104

Though nominal voltage has been 

officially changed to 230V, 240V is 

within tolerances and commonly 

found.  

United States of 

America 

120V 

60 Hz 

  

 

 

Appendix I: 3GPP 

To use the 3GPP function, in addition to previous section, you might need more 

information or configuration to make this function work. 

 

Note

 that to use the 3GPP function, it strongly recommends to install the Networked 

Device with a public and fixed IP address without any firewall protection. 

 

RTSP Port:   

Port 554 is the default for RTSP service. However, sometimes, some service providers 

change this port number for some reasons. If so, user needs to change this port 

accordingly.  

 

Dialing procedure:   

 

1. Choose a verified player (PacketVideo or Realplayer currently) 

 

2. Use the following URL to access:   

rtsp://host/mpeg4/media.3gp  

 

Where host is the host name or IP address of the camera. 

 

 

Compatible 3G mobile phone:   

Please contact your dealer to get the approved list of compatible 3G phone.   

 

 

 

 

 

Summary of Contents for PoE-2600HD

















































































































Reviews: