AirLive PoE-2600HD User Manual Download Page 59

Page: 59 / 112

4. Administrating the Device

AirLive PoE-2600HD/

WN-2600HD User’s Manual

4.2.3 Tour Setting

Up to 128 positions can be preset, and the camera can be programming to move to the
preset position sequentially.

Tour Name:

The group name of the sequence of camera tour. The maximum number of camera
tour is 16.

Running:

Enable or disable this camera tour.

Preset:

Set the sequence of the tour. Maximum 16 points can be assigned. The selected
preset position is added in the Sequence list from 1 to 16.

Wait Time:

Type a period of time during which the camera is to stay at each preset point, between
0 to 36000 seconds.

To use the camera tour function, user must preset some camera positions first.

Summary of Contents for PoE-2600HD

















































































































Search results

Summary of Contents for PoE-2600HD

Reviews:

Related manuals for PoE-2600HD

Brands by name

Popular brands

AirLive PoE-2600HD, User Manual

Search results

Summary of Contents for PoE-2600HD

Reviews:

Related manuals for PoE-2600HD

Brands by name

Popular brands