AirLive PoE-2600HD User Manual Download Page 47

Page: 47 / 112

4. Administrating the Device

AirLive PoE-2600HD/

WN-2600HD User’s Manual

DDNS:

To enable or disable the DDNS service here.

Server name:

Choose the built-in DDNS server.

DDNSHost:

The domain name is applied of this device.

User name:

The user name is used to log into DDNS.

Password:

The password is used to log into DDNS.

4.1.4 PPPoE

PPPoE: Stands for Point to Point Protocol over Ethernet

A standard builds on Ethernet and Point-to-Point network protocol. It allows your device

with xDSL or cable connects with broadband network directly, then your device can dial up

and get a dynamic IP address. For more PPPoE and Internet configuration, please consult

your dealer or ISP.

The device can directly connect to the xDSL, however, it should be setup on a LAN

environment to program the PPPoE information first, and then connect to the xDSL

modem. Power on again, then the device will dial on to the ISP connect to the WAN

through the xDSL modem.

The procedures are

• Connect to a LAN by DHCP or Fixed IP

• Access the device; enter Setting

Network

PPPoE as below

Summary of Contents for PoE-2600HD

















































































































Search results

Summary of Contents for PoE-2600HD

Reviews:

Related manuals for PoE-2600HD

Brands by name

Popular brands

AirLive PoE-2600HD, User Manual

Search results

Summary of Contents for PoE-2600HD

Reviews:

Related manuals for PoE-2600HD

Brands by name

Popular brands