AirLive PoE-2600HD User Manual Download Page 15

Page: 15 / 112

1. Introduction

AirLive PoE-2600HD/

WN-2600HD User’s Manual

1.5 Install the Camera in LAN

1. Plug an Ethernet cable into the Camera

Connect an Ethernet cable to the LAN socket located on the camera’s rear and attach it to

the network.

Ethernet

Cable

2. Connect the external power supply to Camera

Connect the attached power adapter to the DC power jack of the camera. Note: Use the

power adapter, 12VDC, included in the package and connect it to wall outlet for AC power.

Power

Cable

Once you have installed the camera well and powered it on, the power LED will turn on

later. The power LED turned on, it means the system is booting up successfully.

Furthermore, if you have a proper network connection, and access to the camera, the LED

will flash blue under wired mode.

Summary of Contents for PoE-2600HD

















































































































Search results

Summary of Contents for PoE-2600HD

Reviews:

Related manuals for PoE-2600HD

Brands by name

Popular brands

AirLive PoE-2600HD, User Manual

Search results

Summary of Contents for PoE-2600HD

Reviews:

Related manuals for PoE-2600HD

Brands by name

Popular brands