21
11. Re-measure the fork height to make sure the forks are
approximately 100 inches from the ground.
12. Repeat Steps 7 to 12 until the fork height is consistently 98 to
102 inches. (do same for low)
13. Turn off the truck. Tighten the HI PROX target completely.
Completing the Installation
Final Touches
1. Secure all cables, wiring, and components in the truck cab and
on the dash.
2. Coil all excess wire and secure them with zip ties.
3. Tighten all loose zip ties.
4. Using wire cutters, trim the loose ends of the zip ties.
5. Follow the calibration procedure in the BinMaxx User Guide,
available from Air-Weigh Support or at www.air-weigh.com.
Note: BinMaxx will display accurate weights only after it has been
calibrated.
Summary of Contents for BinMaxx
Page 25: ...22 Notes...
