Air Products GASGUARD TE10, Installation, Operation And Maintenance Manual

Page: 5 / 196

Introduction
Revision
–September 2009
Page i - iii
Important Safety Information
Read and understand the safety warnings
section of this manual before working with
the system. Failure to do so can result in
personal injury or death .
Warnings:
Warnings, like the sample shown below are found throughout the manual to
point out hazards which could cause personal injury or death if proper
procedures are not followed:
The operator MUST read and understand
the safety section before operating the
system. All operating and maintenance
personnel must receive training and
instruction by Air Products and Chemicals,
Inc.
System Hazards:
Possible hazards when working with this system are exposure to:

Toxic Gas Hazards

Corrosive Gas Hazards

Flammable Gas Hazards

Oxidizer Hazards

Inert Gas Hazards

Pressurized Gases

Electrical Hazard
Do not make any changes to the equipment
independently. Injury or death may result
from unauthorized modifications. If
equipment needs to be modified, an Air
Products' Representative MUST be
contacted.