VELTRON II
Air Monitor Corporation
116-011-98.P65 (8/30/10)
VELTRON II - IO&M Manual
39
5.17 – STANDARD DISPLAY CONFIGURATION (con't)
SECTION 5 – OPERATION
19. When desired character is displayed, press
ENT
, character will be stored and cursor will advance one position to
the right.
20. Repeat Steps 18 and 19 for all 20 positions. When position 20 is entered, user will be exited back to display as
in Step 16.
21. Press
UP
and display will indicate:
Return to
MAIN MENU
22. Press
ENT
to return to Main Menu.
Note: In "Set Custom Text" mode, the pushbuttons can be used in the following combinations to facilitate
programming:
ESC
+
UP
: Moves position cursor to the right, one position at a time.
ESC
+
DN
: Moves position cursor to the left, one position at a time.
ESC
+
ENT
: Exits "Set Custom Text". Does not enter any changes to the display since the last time
ENT
was
pressed.
UP
+
DN
:
Jumps up five characters at a time, to the desired character.
DN
+
UP
:
Jumps down five characters at a time, to the desired character.
Hold first key, then press second key.
Summary of Contents for VELTRON II
Page 2: ......
