MASS-tron II/CEM
Air Monitor Corporation
116-004-94.P65 (8-31-10)
MASS-tron II/CEM
- IO&M Manual
5.18 – ANALOG OUTPUT CONFIGURATION
SECTION 5 – OPERATION
User can select which process variable Analog Output 4 represents.
Process variables available for output are:
– Transmitter Differential Pressure
– Transmitter Differential Pressure and AUTO-cal Report
– Transmitter Flow
– Temperature
– Absolute Pressure
45
1. While in Main Menu, use
UP
or
DN
to scroll to:
Analog Output
Configuration
2. Press
ENT
to enter Analog Output Configuration menu. Display will indicate:
Output 2
Selection
3. Press
ENT
and display will indicate current setting of Analog Output #Output 4 (NO OUTPUT, TRANSMITTER,
TRANSMITTER D.P., TEMPERATURE, ABS. PRESSURE, XMIT DP & REPORT).
4. Use
UP
or
DN
to change setting. Once desired setting is displayed, press
ENT
. New setting will be stored in
memory and display will return to Analog Output Configuration menu as in Step 2.
Note: If user desires not to change the setting and return to Analog Output Configuration menu, press
ESC
. Unit
will remain programmed as it was originally.
5. To return to Main Menu, select Return to MAIN MENU in Analog Output Configuration menu and press
ENT
.
- Display Configuration
Analog Output Config.
- Transducer Span Selection
- Output 4 Selection
- Return to Main Menu
Output 4
NO OUTPUT
1 Only if Square Root is ON in
Process Configuration.
Analog Output Config.
Return to
MAIN MENU
Default selection shown.
Available selections:
NO OUTPUT
TRANSMITTER
TRANSMITTER D.P.1
TEMPERATURE
ABS. PRESSURE
XMIT D.P. & REPORT
Operator Setup Main Menu
Summary of Contents for MASS-tron II/CEM
Page 2: ......
