10
IS-IP Series:
Input Programming
(cont.)
Click on
Destinations
next to the input being configured. A new window will open. Enter the TermID for each master
station to be called (see page 8 for TermID information). A maximum of 20 master stations TermID’s can be entered.
Check the
Enable
box beside each TermID entered to allow the master to be called. Once all master station TermID’s
have been entered and enabled, click
Apply Settings
at the bottom of this window to save the settings to memory.
Reboot to update adaptor settings.
IX Mobile Server
The IS-IPRY adaptor is used as a server for up to 8 mobile devices when using IX Mobile.
Set the IS-IPRY for use with the IX Series (refer to page 5).
Enter the IP address for each of the mobile devices in the
IX Mobile Server Functionality
table.
Click on
Apply Settings
then click
Reboot
to restart the adaptor with the changes.
Refer to pages 12-15 for steps on adding a mobile device to the IX system using the IX Support Tool and for setting
up the mobile device.
The IX Mobile app turns an iPhone
®
, iPad
®
, or iPod touch
®
running Apple
®
iOS versions 8.0 or higher or mobile
devices running Android™ 4.1 or higher into an IX Series sub master station. Follow the steps below to configure the
IX Series system and to prepare the mobile device(s) for connection via WiFi or over a cellular network with a VPN
connection. Please note the mobile device running the IX Mobile app and the IX Series system must be connected to
the same network.
Important:
IX-Mobile
- An IX-MV master station and an IS-IPRY adaptor are required in the system for the IX Mobile App to work -
- The IX Series hardware devices must be programmed and operational prior to adding the IX Mobile device -
