AiP ABL-005IR, Manual

Page: 30 / 72

SWIR Line Camera Series User’s Manual
(OM150000013H-EN)
－ 30 －
4-12-2
Trigger Source
Select the triger source for acquisition control in Trigger Source.
NOTE
This setting is applied to the trigger selected in Trigger Selector.
Command param1 Description
CL trg-source
0 Software
32 Line0 ※ 1
34 Line1 ※ 1
64 CC1
65 CC2 ※ 1
66 CC3 ※ 1
67 CC4 ※ 1
144 Encoder0 ※ 1
GV TriggerSource
Line0
Line1
Line2
※ 2
Line3 ※ 2
Line4 ※ 2
Line5 ※ 2
Line6 ※ 2
Software
Encoder0
NOTE
※
1 ABL-010IR-CL is not supported.
※
2 ABL-010IR-GE is supported.
4-12-3
Trigger Activation
In Trigger Activation, set an activate condition for the signal selected in Trigger Source.
NOTE
This setting is applied to the trigger selected in Trigger Selector.
command param1 Description
CL trg-activation
0 Rising Edge
1 Falling Edge
2 Any Edge
3 High Level
4 Low Level
GV TriggerActivation
RisingEdge Rising Edge
FallingEdge Falling Edge
AnyEdge Any Edge
LevelHigh High Level
LevelLow Low Level
4-12-4
Trigger Mode
In TriggerMode, user can configure enable or disable following functions.
・
Trigger Source
・
Trigger Activation
NOTE
This setting is applied to the trigger selected in Trigger Selector.
command param1 Description
CL trg-mode
0 Disable trigger mode
1 Enable trigger mode
GV TriggerMode
Off Disable trigger mode
On Enable trigger mode