AiP ABL-005IR, Manual

Page: 28 / 72

SWIR Line Camera Series User’s Manual
(OM150000013H-EN)
－ 28 －
4-11-5
Exposure Mode
Exposure mode can be set by below command.
command param1 Description
CL exp-mode
0 The exposure is controlled by the time programmed by command exposure/exp.
1 The exposure is activated during the pulse width of line start trigger.
GV ExposureMode
Timed The exposure is controlled by the time programmed by command exposure/exp.
TriggerWidth The exposure is activated during the pulse width of line start trigger.
In case you set Exposure Mode as 「 exp-mode 1 」 , 「 ExposureMode TriggerWidth 」 , you need to enable LineStart.
Please refer to 4-12 Trigger Control for how to set the trigger.