Aimco AcraDyne, Setup Instruction

Page: 8 / 16

8
Gen IV Controller with Smart Arm Setup Instruction Manual
On the Edit Job screen, select Advanced Options
The following screen will appear
Under Additional Options, select the part image
you want to associate with the job. Click
when
finished. Click again to return to Jobs screen.
8.2 Associate an Image with a Job
Once a smart arm accessory and part images
have been set up, you can associate a job with
a specific smart arm part image in the controller's
Job interface. This image will automatically appear
when that job is chosen.
From the Main Gen IV Controller Screen, select Job
The jobs screen will appear. Select the job that you
want to associate with an image, then select edit