![background image](http://html1.mh-extra.com/html/aim/anet1553-1/anet1553-1_user-manual_2871732017.webp)
ANET1553 Users Manual
9
2.2.2 Buttons and LEDs
2.2.2.1 Ethernet RJ45 connector Status LEDs
On the RJ45 connector two status LEDs are implemented. One for Link and Activity
status (yellow) and the other one for the speed detection (10/100Mbit, green).
2.2.2.2 Status Indicator
On top of the ANET1553 cover, the transparent AIM Logo is illuminated and indicates
the status from the ANET1553 as following:
Power ON/OFF / Normal operation
1) LED = RED illuminated
Illuminated during power on cycle
2) LED = BLUE fast pulsing
Fast pulsing blue during ASP / LINUX boot up
3) LED = BLUE slow pulsing
Slow pulsing blue when the on board OS has been boot up (ready for
operation)
4) LED = RED fast pulsing
Fast pulsing red during ASP / LINUX shutdown (power off) cycle and during re-
boot commanded via the ANET Web Configuration tool
Emergency- / Maintenance- Mode (e.g. running an update)
1) LED = RED fast pulsing
Fast pulsing red during re-boot OS
to Maintenance-Mode and during an update
cycle is running
2) LED = RED slow pulsing:
If OS
is in Maintenance-Mode