6
ANET1553
Users
Manual
2.2 Hardware Installation
Connect the external power supply (wall adapter) to the DC-power IN plug, than push
the power on-off button for powering on the ANET1553 module.
2.2.1 Connectors
The external interface of the ANET1553 consists of the following connectors:
Front panel
-
Up to four TWINAX connectors at the front side providing the MIL-STD-
1553 channels.
Back panel
-
Auxiliary 15-pin High Density DSUB connector for the Trigger IN/OUT
signals, IRIG IN/OUT for multi-channel time tag synchronization and
the eight Discrete IN/OUT signals.
-
A RJ45 Ethernet plug, for connecting the ANET1553 with a Network/
Host
-
USB Type A host connector e.g. for connecting an external storage
device or an optional WLAN stick
Figure 2-3 Front panel
