ANET1553 Users Manual
3
2
INSTALLATION
The ANET1553 is a stand-alone module with an Ethernet connection to a Host PC.
This section contains the procedures used to install the Board Support Package (BSP)
and to setup the ANET1553 hardware. The latest BSP versions are also available on
the AIM download area (
) .
2.1 BSP Installation
The ANET1553 BSP contains a set of documents (Users Manual, Programmers Guide,
Reference Manual), the Application Interface Library (API) DLL files, the Import Library
(.LIB) with the C Header-Files, some software samples, the compressed on board
software/firmware update file and add-ons (e.g. the AIM Network Detection Tool).
These files are automatically copied to the system (e.g. HOST PC) by installing the BSP
software package.
The software is available on DVD from AIM or via a download from
AIM-Online
,
instructions how to obtain the BSP via a download from
AIM-Online
are described in
the following chapter.
To install the BSP software from the AIM provided DVD or a download from
AIM-Online (
1. If using the AIM provided DVD, insert the DVD into the DVD ROM drive.
The HTML Navigator will automatically start after a few seconds.
If the HTML Navigator does not start after a few seconds, the Navigator has
to be started manually. Navigate to the DVD ROM drive and double click the
index.html
icon.
2. Choose the ANET1553 and store the
setup.exe
to your system.
3. To Start the BSP installation, double click to the
setup.exe
file.
