8
ANET1553
Users
Manual
2.2.1.2 Auxiliary Connector HD DSUB15
On the ANET1553 a 15-pin female High Density
DSUB auxiliary connector is implemented for the
Trigger IN/OUT, IRIG IN/OUT and Discrete I/O
signals.
The figure on the right side shows the high density
DSUB connector.
The Table below shows the pin assignment.
A description of the Trigger IN/OUT, IRIG IN/OUT
and the Discrete IOs can be found later in this document.
Pin Signal
Pin Signal
Pin Signal
1
IRIG In
6
Discrete I/O 1
11
Discrete I/O 4
2
IRIG Out
7
Discrete I/O 2
12
Discrete I/O 5
3
Trigger OUT CH1
8
Trigger OUT CH2
13
Discrete I/O 6
4
Trigger IN CH1
9
Trigger IN CH2
14
Discrete I/O 7
5
GND
10
Discrete I/O 3
15
Discrete I/O 8
Table 2.2.1-1 Pinout Auxiliary Connector
2.2.1.3 USB TYP-A Host connector
A TYP-A host USB connector is provided e.g. for connecting external storage devices or
an optional WLAN stick.
2.2.1.4 DC Power IN connector
The DC Power in plug is a DC panel socket with a 2,5mm centre pin.
The nominal input voltage is 12V DC via the centre pin..
Figure 2-7: DC panel socket
2.2.1.5 RJ45 Ethernet connector
For the Ethernet connection a standard RJ45 plug is provided at the back panel.
Figure 2-6: Auxiliary Connector
