4
ANET1553
Users
Manual
Figure 2-1 ANET1553 BSP Setup
4. Once the
Setup Application
has been started, step through the install wizard
to complete the installation.
You will be given the opportunity to choose the directory where the BSP is to
be installed. Default locations can also be used.
The BSP installation will result in the creation of the following
Program Folder
icons
which can be found by going to
Start | All Programs | AIM GmbH | ANET1553 BSP Vxxxx
:
The BSP installation will also result in the creation of the
directory structure as shown on the right side.
The
AIM GmbH
sub-directory will be located by default in the
directory
C:\Program Files\
. The
Program Files
directory is located on the drive which was chosen during
BSP installation.
Figure 2-2 program
Folders and Files
