10. Measuring using Measuring-Menus
49
10.7.3
Function Outputs:
The functions of all measurement menus can be
output in the listed sequence by using the key:
<PRINT>
(s.a. 9.3.4)
The print format of the individual functions is given
in the following table:
Funktion
Output
Befehl
Meas. Values all
01: +0023.5 °C Temperatur
P35
Maximum Value
MAXIMUM: 01: +0020.0 °C
P02
Maximum Time
MAX-TIME: 01: 12:32 01.02
P28
Minimum
MINIMUM: 01: -0010.0 °C
P03
Minimum Time
MIN-TIME: 01: 12:32 01.02
P29
Average Value
AVERAGE VAL.:01: +0017.8 °C
P14
Averaging Mode
AVERAGEMODE: 01: CONT
P21
Averaging Count
AVERAGECOUNT:01: 00178.
P22
Memory Free
MEMORY: S0512.1 F0324.4 A
P33
Number
NUMBER: 01-012
P23
Range (Comment)
RANGE: 01: NiCr
P24
Limit Max
LIMIT MAX: 01: -0100.0 °C
P08
Limit Min
LIMIT MIN: 01: +0020.0 °C
P09
Base
BASE: 01: -0273.0 °C
P06
Factor
FACTOR: 01: +1.0350E-1
P07
Zero Point Correction
ZERO CORR: 01: -0000.7 °C
f1 P06
Slope Correction
SLOPE CORR: 01: +1.0013
f1 P07
Analog-Start
ANALOG START:01: +0000.0 °C
P16
Analog-End
ANALOG END: 01: +0100.0 °C
P17
Cycle
PRINT CYCLE: 00:06:00
P11
Cycle-Timer
PRINT TIMER: 00:06:00
f1 P11
Time, Date
TIME: 12:34:00 01.02.04
P10, P13
Start Time
START TIME: 07:00:00
f1 P10
End Time
END TIME: 17:00:00
f2 P10
Satrt Date
START DATE: 01.02.04
f1 P13
End Date
END DATE: 02.02.04
f2 P13
Measuring Time
MEASURETIME: 00:00:00.00
P46
Meas. duration
MEAS. DURATION 00:00:00
P47
Damping
DAMPING: 01: 10
P32
Diameter
DIAMETER: 01: 00100 mm
P25
Cross section
CROSS SECT: 01: 00078 cm2
P26
Atm. pressure
A.PR01013.mb
P43
Temp. compensation
COMPENSATION:01: 25.0°C
P44
Setpoint
SET POINT: 01: 1100.0°C
P45
Device designation
Fa.Ahlborn,Holzkirchen
P36
Line
-----------------------------
P31
Blank line
P30
Text1
Comment Text 1
P37
Text2
Comment Text 2
P38
Text3
Menu Title U1
P39
Text4
Menu Title U2
P40
Text5
Menu Title U3
P41
Locking
LOCKING MODE: 5
P42
