background image

   

   

Visit   us   at   

www.thingslog.com

;   (+359)   875   32   80   70;   

[email protected]

   

   

User Manual 

Low powered mobile data logger  

ThingsLog

 

LPMDL-1101 GSM / GPRS Data logger

 

 

1

 

Overview   

ThingsLog    LPMDL-­‐1101    is    a    universal,    low    power    mobile    data    logger    able    to    meter    various    kinds    of    pulse   
meters   and   analog   sensors.   The   logger   is   transmitting   the   metered   data   over   2G/GSM/GPRS.   

LPMDL-­‐1101   has   the   following   key   characteristics:   

Optimal   data   transmissions

   -­‐   LPMDL-­‐1101   is   able   to   transmit   the   data   over   a   two   way   GSM/GPRS   network   in   

an   optimal   for   the   battery   way.   That   allows   the   logger   to   meter   per   minute,   to   transmit   a   couple   of   times   per   
day   and   still   to   achieve   more   than   5   years   of   battery   life.      

Intelligence

    -­‐    the    data    is    transmitted    over    a    widely    distributed,    cellular    network    and    is    automatically   

gathered   in   ThingsLog   platform.   

Pulse   metering

   -­‐   

LPMDL-­‐1101

   has   ability   for   an   independent   counting   of   pulse   output   meters   for   water,   gas,   

power   and   heating.   With   a   single   data   logger   you   can   meter   two   meters   for   example   for   cold   and   hot   water   
or   if   your   meters   are   in   proximity   distance   you   can   meter   with   a   single   device   gas,   power   and   heating.      

Analog   sensors   metering    -­‐   LPMDL-­‐1101   

has

   

two   extra   inputs   for   connecting   analog   sensors   with   4-­‐20   mA   

output.   An   example   could   be   connecting   two   pressure   sensors   or   one   pressure   and   one   temperature   sensor.         

Combined   monitoring   -­‐   LPMDL-­‐1101   

can   fulfill   use   cases   where   with   a   single   logger   have   to   be   monitored   

one    water    meter    and    two    pressure    sensors.    For    example    monitoring    of    pressure    reduction    areas    by   
measurements   of   pressure   sensors   before   and   after   the   pressure   reduction   valve   and   its   water   meter.         

Alarms    and    notifications    -­‐    LPMDL-­‐1101

    together    with    the    ThingsLog    platform    is    able    to    monitor   

consumption    and    notify    the    customer    or    the    utility    company    for    leaks,    high    or    low    consumption,    fraud    or   
thresholds   bridging   of   certain   sensor   value   or   a   combination   of   a   sensor   and   metered   value.   

Application    -­‐    LPMDL-­‐1101   

fulfills    various    use-­‐cases    in    water,    power    and    gas    distribution    utilities    but    also   

many    other    use-­‐cases    in    property    management,    hotel,    manufacturing,    condominium    sub-­‐metering    or    in   
common   need   is   spread.      

Ability   to   work   in   any   environment

   -­‐   

LPMDL-­‐1101

   has   IP68   dust   and   leakage   protection   and   is   suitable   for   

any   kind   of   home   or   industrial   usage.      

Summary of Contents for LPMDL-1101

















Reviews: