INSTRUCTIONS FOR USE
AGS 1800 - 2000 EN-HV (HVB)
Rev.9/2018
39
7.9
PACKAGING RINSING NOZZLE
Figure 7.10
The valve is designed to wash the packaging of liquid plant protection chemicals. It is installed inside
the filling container and connected with the valve on the filling container (8) through a hose. The
packaging is washed by placing it over the nozzle (9) and administering water through the valve (8).
The rinsing nozzle can also be used to penetrate the protective film under the packaging lid to prevent
contamination of the surrounding area.
7.10
DESCRIPTION OF SETTING OF VALVES FOR SPRAYING OR CLEANING
7.10.1
SPRAYING
Direct the spray towards the suction valve by adjusting the drain valve on the main reservoir (13 –
Figure 4.5). Make sure the valve is open, in order to pump from the main reservoir (14 – Figure 4.5).
Direct the spray into the pressure regulator (7 – Figure 4.5) through the filter (6 – Figure 4.5) and
pump (3 – Figure 4.5).
