INSTRUCTIONS FOR USE
AGS 1800 - 2000 EN-HV (HVB)
Rev.9/2018
69
Figure 12.21
Guides, which slide on the interior side
of frame (Figure 12.21), are set by an
adjustable screw (1). Partially unscrew
the screws (3), which are fixing the
guide. Setting is done with adjustable
screw (1) until guide does not reach
minimum
airiness.
After
reaching
desired airiness, fix the guide with
screws (3) to shoulder carrier.
Figure 12.22
Setting procedure is similar for guides,
sliding on the exterior side of frame,
only exception being that you have to
use a manual vice (2). Fix the manual
vice to guide and shoulder carrier
(Figure 12.22). After achieving desired
airiness, partially unscrew screws (4),
so that the guide manually closes to its
working side on the frame. After
finishing setting, fix the guide with
screws (4) to shoulder carrier and
release and remove the vice.
12.4.5
SAFETY BOOM AND SPRING SLIDER
12.4.5.1
SAFETY BOOM
Figure 12.23
