INSTRUCTIONS FOR USE
AGS 1800 - 2000 EN-HV (HVB)
Rev.9/2018
36
7.5
MIXING NOZZLE
Figure 7.4
To ensure better mixing, the sprayer is fitted with
mixing nozzles, integrated into the bottom part of
the reservoir. The mixing nozzles are supplied
directly by the centrifugal pump C200. Mixing is
always activated when the PTO drive shaft on the
tractor is engaged. When preparing the spray and
driving to the field, it is recommend to engage the
PTO drive shaft to ensure that the spray is mixed.
7.6
SUCTION FILTER
The suction filter is mounted between the reservoir and the pump. Its function is filtering the
insecticide before it reaches the regulator. The size of the filter is 50 MESH.
7.6.1
CLEANING FILTER INSERT
Firstly, unscrew the yellow lever (3) on the filter cover (2) by turning it counter clockwise and pulling
it out. The valve mounted inside the filter will close the flow of the liquid from the main reservoir.
Unscrew the nut (5) from the filter cover and remove the cover and the filter insert (4). Clean the filter
insert and mount all parts back together in the reverse order.
When mounting the parts back together, make sure that the metal pin of the locking valve, which is
located at the extracted part (with a yellow lever) will be properly inserted, otherwise the filter will not
function properly.
Figure 7.5
WARNING: Use protective gloves when cleaning the filter! Clean the filter insert
before each filling of the reservoir!
