Operation Instruction
-28-
cultivator, mower, etc.
2.16.4 Operation of the power output device
The power output shaft of this series of tractor is of a postposition detached type, a synchronous
type, an independent type.
2.16.4.1 Operation of the power output
shaft
A synchronous type and an independent type power output shaft operated by power output shaft
control handle.
1. When pulling up control handle, it is synchronous power output. The rotating speed of PTO
have certain rate with the rotating speed of tractor
2. Control handle is located in middle position, it is in neutral position.
3. Press the control handle, it is independent power output. And it can move work and fix work.
The PTO’s working is total independent. So when press main cultch to stop moving, PTO shaft still
work. Separate PTO shaft clutch, power output stop working, but still moving.
2.16.4.2 Operation of the power output shaft clutch
Pull up the vice clutch control handle, PTO shaft clutch separation, press the PTO control
handle at the moment.
Press the clutch control handle slowly, it make PTO smoothly.
It seems from the rear of tractors, the PTO’s rotating direction is clockwise. In accordance with
PTO splined’s rotating direction
Warning:
1. When separating PTO shaft, press the locked device in vice-clutch control handle,
then pull up the handle.
2. Whether PTO shaft working or not, the PTO shaft clutch should be in combinate
position. That is the vice-clutch control handle at the bottom, only before connect PTO, it is
separating.
2.16.4.3 Independent power output shaft
When tractors’ implements need power output, should be operate as follows,
○
1
connect agricultural implements with suspension.
○
2
pull up vice-clutch handle, put the power output control handle on the middle
neutral shift.
○
3
pull out the traction bracket and power output shaft cover, then connect
universal joint with power output shaft.
○
4
package well the power output container housing.
○
5
put the lift control handle on the “Lift” position, lifting agricultural
implements.
○
6
pull up the vice-clutch handle again, then press the PTO control handle, at
this time, it is independent power output. It is according your demands to
Summary of Contents for 110HP ULTRA
Page 7: ...Contents ...
Page 19: ...Safety Notes 12 ...