Agrimate AM-RTD-5D User Manual Download

Page: 51 / 54

1st Free Service Coupon

ISO 9001-2015

CERTIFIED COMPANY

FREE SERVICE COUPON (30 Days / 20 hrs (Which ever is earlier)

Customer Signature.........................................

Conditions: Operations listed have been performed to my entire satisfaction without any labour charges. Only consumables were charged.

agriculture

horticulture

sericulture

plantations

forestry

garden

health care

2nd Free Service Coupon

ISO 9001-2015

CERTIFIED COMPANY

FREE SERVICE COUPON 60 Days/100 hrs (Which ever is earlier)

Customer Signature.........................................

Conditions: Operations listed have been performed to my entire satisfaction without any labour charges. Only consumables were charged.

agriculture

horticulture

sericulture

plantations

forestry

garden

health care

3rd Free Service Coupon

ISO 9001-2015

CERTIFIED COMPANY

FREE SERVICE COUPON 90 Days/200 hrs (Which ever is earlier)

Customer Signature.........................................

Conditions: Operations listed have been performed to my entire satisfaction without any labour charges. Only consumables were charged.

agriculture

horticulture

sericulture

plantations

forestry

garden

health care

ARRANTY AND FREE SERVICE COUPON

Model

PDI Date

Dealer’s Office Seal & Signature

Service No.

Purchase bill no.

Date

Serial Number

AM-RTD-5D

AGRIMATE ROTARY TILLER /ROTARY WEEDER / POWER WEEDER / CULTIVATOR

Model

PDI Date

Dealer’s Office Seal & Signature

Service No.

Purchase bill no.

Date

Serial Number

AM-RTD-5D

AGRIMATE ROTARY TILLER /ROTARY WEEDER / POWER WEEDER / CULTIVATOR

Model

PDI Date

Dealer’s Office Seal & Signature

Service No.

Purchase bill no.

Date

Serial Number

AM-RTD-5D

AGRIMATE ROTARY TILLER /ROTARY WEEDER / POWER WEEDER / CULTIVATOR

Summary of Contents for AM-RTD-5D























































Search results

Summary of Contents for AM-RTD-5D

Reviews:

Related manuals for AM-RTD-5D

Brands by name

Popular brands

Agrimate AM-RTD-5D, User Manual

Search results

Summary of Contents for AM-RTD-5D

Reviews:

Related manuals for AM-RTD-5D

Brands by name

Popular brands